The Rainfall Sensor is a module that comes in the basic model of the Pinova Meteo \u00a0Agrometeorological Station and is used to accurately measure the amount of rainfall.<\/p>\n
Measurements are performed periodically, with data storage for later analysis of total precipitation amount in liters per m2<\/sup>\u00a0during:<\/p>\n The Principle of Rain Sensor RG300<\/strong><\/p>\n The Pinova precipitation sensor works according to the “tipping bucket” mechanism (Webster, 1999). Rain, snow, hail and\/or other precipitation fall into a roller bowl with an opening at the top. The burst is then left through the opening on the bowl and is collected in one of the two small chambers that move around the support point. These small chambers are made in narrow tolerances to achieve the exact amount of rainfall in each of them. The rain from the bowl is poured into one of the chambers. When it is filled with the appropriate amount of precipitation, which is equal to the increment that is measured by the chamber (0.1 mm), the chamber is overcome to one side and then the full chamber is empty and the empty space reaches the appropriate position to pass trough the next step rainfall. Every time the chambers are switched on, the switch is connected and a pulse is generated.<\/p>\n The Rainfall Sensor is a module that comes in the basic model of the Pinova Meteo \u00a0Agrometeorological Station and is used to accurately measure the amount of rainfall. Measurements are performed periodically, with data storage for later analysis of total precipitation amount in liters per m2\u00a0during: 10 minutes two hour 6 hour One day One […]<\/p>\n","protected":false},"featured_media":1607,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"off","_et_pb_old_content":"","_et_gb_content_width":""},"product_cat":[43,50],"product_tag":[],"class_list":{"0":"post-2634","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-sensors","7":"product_cat-microclimate","9":"first","10":"instock","11":"shipping-taxable","12":"product-type-simple"},"yoast_head":"\n\n
\n\n
\n Resolution<\/td>\n 0.1mm<\/td>\n<\/tr>\n \n Acuration<\/td>\n 0.2-20 mm\/h \u00b110%; >20 mm\/h +5\/-15%<\/td>\n<\/tr>\n \n Repeatability of the measurement<\/td>\n \u00b15%<\/td>\n<\/tr>\n \n Min. Measurable amount<\/td>\n 0.1 mm<\/td>\n<\/tr>\n \n Max. Measurable amount<\/td>\n Unlimited (mm\/h)<\/td>\n<\/tr>\n \n Sensor type<\/td>\n Double-spoon tipping bucket with funnel<\/td>\n<\/tr>\n \n Method of measurement<\/td>\n Magnetic relay<\/td>\n<\/tr>\n \n Output signal<\/td>\n 100ms pulse\/cycle<\/td>\n<\/tr>\n \n Power<\/td>\n 3-6 V DC<\/td>\n<\/tr>\n \n Consumption at idle<\/td>\n 0 A<\/td>\n<\/tr>\n \n Funnel material<\/td>\n Polyester composite, UV resistant<\/td>\n<\/tr>\n \n Surface area<\/td>\n 300 cm\u00b2<\/td>\n<\/tr>\n \n Working environment<\/td>\n 0\u00b0C do 60\u00b0C<\/td>\n<\/tr>\n \n Cable length<\/td>\n 1.5 m<\/td>\n<\/tr>\n \n Connector type<\/td>\n 3.5 mm stereo connector<\/td>\n<\/tr>\n \n Dimensions<\/td>\n \u2205160\/200 x 260 mm<\/td>\n<\/tr>\n \n Weight<\/td>\n 1000g<\/td>\n<\/tr>\n \n Warranty<\/td>\n 12 months<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"