Support

Contact us for any inquiries related to our products.

• Pinova Meteo – agrometeorological stations
• Pinova Meteo data  – agrometeorological data

Maintenance of agrometeorological station

Although the station is robust and resistant, some segments on it are more sensitive and need periodic maintenance. Things you should pay attention to:

• Rain gauge cleaning

  We recommend that you remove the tap once a month and remove the accumulated garbage because otherwise obstructions and misalignments of rain can occur. With the hand, pull out the two screws that are on the outside of the sleeve and remove it. If there is any accumulated garbage in it, pull it out, making sure that the grid and the liquid router located at the bottom of the plunger do not fall out. The most common cause of congestion is: leaves, insects, birds and dust.

• Cleaning or protecting the moisture sensor list

  We recommend that you protect the sensor with a bag before each plant protection and wipe it once a month with a damp cotton cloth. Some of the plant protection products are aggressive and can affect their lifespan, and by regular maintenance the lifespan of the sensor is prolonged. Even unclean sensors can show more moisture on the leaf than there really is. When checking or cleaning, make sure that the active side of the sensor is not in contact with leaves, fruits or branches.

• Protection of the temperature and humidity sensor

  It would be desirable to cross or wrap the prior art of any plant protection with the RHT shield in which the sensor is located. Due to the accumulation of small particles of the pesticide on the mesh of the sensor after a long time, it may be possible to measure wrong humidity of the air.

• It is not necessary for Meteo station to be stored inside during the winter.